ว.อะไหล่วิทยุ

Power Amp CROWN XLS-DRIVECORE รุ่น XLS2500 0

Power Amp CROWN XLS-DRIVECORE รุ่น XLS2500

฿0.00

Power Amp CROWN XLS-DRIVECORE รุ่น XLS 2500Minimum Guaranteed Power (per channel, both channels driven) XLS 1000XL

จำนวน

หมวดหมู่ : CROWN
รหัสสินค้า : 000772

รายละเอียดสินค้า Power Amp CROWN XLS-DRIVECORE รุ่น XLS2500

Power Amp CROWN XLS-DRIVECORE รุ่น XLS 2500

Minimum Guaranteed Power (per channel, both channels driven)

	XLS 1000	XLS 1500	XLS 2000	XLS 2500
Stereo, 2 ohms (per ch.)	550W	775W	1050W	1200W
Stereo, 4 ohms (per ch.)	350W	525W	650W	775W
Stereo, 8 ohms (per ch.)	215W	300W	375W	440W
Bridge-Mono, 8 ohms	700W	1050W	1300W	1550W
Bridge-Mono, 4 ohms	1100W	1550W	2100W	2400W

XLS Series with Integrated DriveCore™ Technology

The XLS Series of power amplifiers from Crown define the standard for live sound systems with unmatched performance, technology, and affordability.

This high-performance line consists of four models each providing enormous power and flexibility thanks to the integrated DriveCore™ Technology, PureBand™ Crossover System and Peak_x™ limiters. And weighing in at only 10 lbs or less, they provide the ultimate in lightweight portability.

Generating chest-thumping lows and crystal clear highs, the four models in the series – the XLS1000, XLS1500, XLS2000, and XLS2500 – are engineered to meet any demanding audio requirements – reliably and within budget.

Every XLS Series amplifier is backed by Crown's unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything.

With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the Crown XLS Series. They are a powerful argument for performance, flexibility, and value!

Specifications

Sensitivity (for full rated power at 4 ohms)	1.4 Vrms
Frequency Response (at 1 watt, 20 Hz - 20 kHz)	+0 dB, –1 dB
Signal-to-Noise Ratio	Rated as dBr to full rated 8Ω power output (A-Weighted): XLS1000 > 97 dB XLS1500, XLS2000, XLS2500 > 103 dB
Damping Factor (8 ohm): 10 Hz to 400 Hz	> 200
Crosstalk (below rated 8Ω power)	At 1kHz: > 85dB At 20kHz: >55dB
Input Impedance (nominal)	20 kΩ balanced, 10 kΩ unbalanced
Load Impedance	2 to 8 Ω per channel in Stereo 4 to 8 Ω in Bridge Mono
AC Line Voltage and Frequency Configurations Available (± 10%)	120 VAC 60 Hz 100 VAC 50/60 Hz 220 and 240 VAC 50 Hz
Ventilation	Flow-through ventilation from front to back
Cooling	Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation
Air Volume Requirements (per minute per unit)	80.15 ft³ (2.27 m³)
Integrated Processing	PureBand™ Crossover System Crossover Filter: Linkwitz-Riley 24dB per Octave CrossoverFrequencyRange: 50 HZ - 3 kHz Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF). Peak_x™ limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers
Input/Output	Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers. Output Connectors: Two 4-Pole Speakon® Output Connectors accept 2-pole or 4-pole Speakon® connectors. The top Speakon connector is wired for both channels so it can be used for bridgemono wiring or for stereo wiring of two speakers to a single Speakon connector. One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs.)
Construction	XLS1000/XLS1500: 8.12-Inch (20.62cm) depth XLS2000/XLS2500: 10.35-Inch (26.29cm) depth
Dimensions	EIA Standard 19-inch (48.3-cm) rack mount width (EIA RS-310-B), 3.5-inch (8.9-cm) height. XLS 1000/1500: 7.7-inch (19.6-cm) depth. XLS 2000/2500: 10.7-inch (27.2-cm) depth.
Net Weight , Shipping Weight	XLS1000: 8.6 lb (3.9kg), 13.6 lb (6.2 kg) XLS1500: 8.6 lb (3.9kg), 13.6 lb (6.2 kg) XLS2000: 10.75 lb (4.9kg), 15.8 lb (7.1 kg) XLS2500: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)